# 2.Serial port

There are 2 serial ports,which are separately located on 2 expansion sockets (P16, P17) ,on BiBoard.

The serial port 1 on the P16 can be connected to the USB downloader and  the external serial device.  Please do not use the downloader and the external serial device at the same time. The serial port voltage division will lead to communication errors.                           

In the Arduino demo, Serial represents the serial port 0, Serial1 represents the serial port 1.Serial and Serial1 send to each other.

```c
/* In this demo, we use Serial and Serial1 
*  Serial and Serial1 send to each other 
*/

void setup() {
  // initialize both serial ports:
  Serial.begin(115200);
  Serial1.begin(115200);
}

void loop() {
  // read from port 1, send to port 0:
  if (Serial1.available()) {
    int inByte = Serial1.read();
    Serial.write(inByte);
  }

  // read from port 0, send to port 1:
  if (Serial.available()) {
    int inByte = Serial.read();
    Serial1.write(inByte);
  }
}
```


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://guide.petoi.com/biboard/demo-applications/2.serial-port.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.